Passat Sedan 4Motion V6-3.6L (BLV) (2007)
-
Remove the (T10133/6) and the (T10133/5).
-
Slide the seal by hand into the groove.
-
Install the (T10133/11) onto the injector.
-
Press the (T10133/7) over the seal to the stop on the (T10133/11).
-
Remove the (T10133/7).
-
Press the (T10133/8) over the seal to the stop on the (T10133/11).
-
Remove the (T10133/8).
The Teflon seal now has the correct installed dimension.