volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Cigarette Lighter Assembly Overview|Page 17397 > < Cigarette Lighter Assembly Overview|Page 17395
Page 1
background image

Cigarette Lighter: Service and Repair
Cigarette Lighter Illumination

Cigarette Lighter Illumination

The following procedures apply to left rear cigarette lighter (U3),right rear cigarette lighter (U7),rear cigarette lighter (U9),12V outlet 2 (U18),12V
outlet 3 (U19),12V outlet 4 (U20),cigarette lighter 2 (U25) and 12V outlet 5 (U26) with illumination.

‹› On some vehicle equipment levels, socket illumination is via Light Emitting Diode (LED) instead of a bulb. These LEDs are integrated with the

illumination housing and cannot be serviced or replaced separately.

‹› Various versions of illumination housing with bulb exist. One version allows separate replacement of the illumination bulb, and another where the

bulb cannot be serviced or replaced separately. In this case, the entire illumination housing must be replaced.

Removing:

-

Remove the socket. Refer to => [ Cigarette Lighter Socket ] See: Cigarette Lighter Socket

-

Depress retainers - arrows - and remove mounting sleeve with bulb holder.

-

Unclip bulb holder from mounting sleeve.

-

Separate bulb holder sections - A - and -  B -.

-

Open bulb holder section - B -.

-

Remove bulb in direction of - arrow -.

Cigarette Lighter Assembly Overview|Page 17397 > < Cigarette Lighter Assembly Overview|Page 17395