Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Fuel Gauge Sender: Removal and Replacement
Fuel Level Sensor
Fuel System Components
Fuel Level Sensor
‹› Read the safety precautions before beginning work. Refer to => [ Safety Precautions ] See: Powertrain Management/Fuel Delivery and Air
Induction/Service Precautions/Safety Precautions/Fuel Supply.
‹› Observe the rules for cleanliness. Refer to => [ Clean Working Conditions ] See: Powertrain Management/Fuel Delivery and Air Induction/Service
Precautions/Clean Working Conditions/Fuel Supply.
‹› Fuel tank and components overview. Refer to => [ Fuel Tank and Components Overview ] See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Tank/Service and Repair/Removal and Replacement/Fuel Tank and Components Overview.
Removing
-
Remove the fuel delivery unit. Refer to => [ Fuel Delivery Unit ] See: Powertrain Management/Fuel Delivery and Air Induction/Fuel
Pump/Service and Repair/Procedures/Fuel Delivery Unit.
-
Pull the fuel level sensor (G) slightly to the side and simultaneously upward.
-
If the sensor cannot be released this way, press the retaining tabs - arrows - to the side slightly.
-
Note the color of the wire for installing later.