Passat Sedan 4Motion V6-3.6L (BLV) (2007)
License Plate Lamp: Service and Repair
License Plate Lamp Attached By Clips
License Plate Lamp Attached by Clips
Removing:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Press the license plate lamp tab - arrow - and remove the lamp from the bumper cover.
-
Disengage and disconnect harness connector - arrow -.
Installing:
Install in reverse order of removal, noting the following:
‹› Install the license plate lamp into the bumper cover so that the connector faces the left side of the vehicle.
-
Check the license plate lamp function.