Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Glove Box Lamp Switch: Service and Repair
Instrument Panel Lamps and Switches
Glove Compartment Lamp Switch (E26)
‹› The illustration shows Glove Compartment Lamp Switch - 1 - with instrument panel removed. The instrument panel does not need to be removed
in order to remove and install the switch.
‹› Glove Compartment Lamp Switch - 1 - can be reached through the opened glove compartment and can be unclipped.
Removing:
-
Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).
-
Unclip Glove Compartment Lamp Switch - 1 - with connected wire - arrows -.
-
Pull out Glove Compartment Lamp Switch as far as wire lengths permit and disconnect harness connector.
Installing:
Install in reverse order of removal.