Passat Sedan 4Motion V6-3.6L (BLV) (2007)
-
Install a oil container - A - onto the (VAS 6291).
-
Open the valve - arrow - and hold the oil container as shown in the illustration.
The bevel box is now filled.
-
Raise the vehicle after a few minutes.
‹› If the bevel box is filled correctly, oil should leak out from the (VAS 6291/2)- A -.
‹› If no oil is leaking out, lower the vehicle and perform the filling procedure again.
-
Raise the vehicle.
-
If oil leaks from the (VAS 6291/2)- A -, set down the oil container (for example, on a tool trolley).
A portion of the excess oil will run back into the oil container.
-
When no more oil flow backs, remove the (VAS 6291) by pressing the tab in the - direction of the arrow -.
-
Remove the (VAS 6291/2)
-
Install the previous oil fill plug.
-
Make sure there is still oil in the (VAS 6291) hose.
-
Start the engine, select a gear and allow the transmission to turn for approximately 2 minutes.