Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Tire Pressure Sensor
Tire Pressure Sensor
Removing
-
Remove the union nut - 1 -.
-
Remove tire pressure sensor - 2 - from rim well.
Installing
CAUTION!
‹› Clean the valve opening before installing the tire pressure sensors.
-
Insert the tire pressure sensor - 2 - with new seal and sealing washer and press it on the spots marked with the - arrows - into the disc wheel (rim).
-
Press the tire pressure sensor - 2 - on the spots marked with the - arrows - into the disc wheel (rim).
Screw on union nut - 1 - from outside onto tire pressure sensor.
-
Press the tire pressure sensor - 1 - on the spots marked with the - arrows - into the rim and tighten the union nut to 8 Nm.