Passat Sedan 4Motion V6-3.6L (BLV) (2007)
/Page-1474002.png)
Installing
-
when reusing an oxygen sensor, only use hot bolt paste (G 052 112 A3) to lubricate the threads; do not let the paste get onto the slits of the oxygen
sensor body.
-
Install the HO2S - 1 - into the bank 1 exhaust pipe. Identifying feature: black connector.
-
Install the HO2S 2 - 2 - into the bank 1 exhaust pipe. Identifying feature: brown connector.
Tightening specifications: 50 Nm
-
Install the original wiring again.
Further installation is performed in reverse order.
