Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Transmission Position Switch/Sensor: Service and Repair
Multifunction Transmission Range Switch
Special tools, testers and auxiliary items required
‹› Torque Wrench (5-50 Nm) (V.A.G 1331)
Removing
-
Place the selector lever in the "N" position.
-
Turn the ignition off.
-
Do not open the cooling system.
-
Press the selector lever cable lock - 3 - together and pull the selector lever cable upward out of the bracket.
-
Remove the selector lever cable - 1 - from the lever/shift rod by hand.
-
Take care not to bend or kink the selector lever cable.
-
Disconnect the connector from multifunction transmission range switch (F125).
-
Remove the nut - 1 -.