Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Seat Belt: Service and Repair
Front Seat Belt Height Adjuster
Seat Belts
Front Seat Belt Height Adjuster
‹› Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.
Removal
-
Remove upper B-pillar trim. Refer to => [ Upper B-Pillar Trim ] See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and
Repair/Pillar Trim
‹› Belt anchor does not need to be removed.
-
Remove bolt - 1 - (40 Nm) and remove belt relay - 2 - from belt height adjuster.
-
Remove bolt - 3 - (20 Nm) and separate belt height adjuster - 4 - from mounting in carrier plate.
Installation
-
To install, perform the steps used for removal in reverse order.
Front Seat Belts
Seat Belts