Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Terminal 3 + socket 78
Terminal 4 + socket 79
Terminal 5 + socket 56
Terminal 6 + socket 57
Wire resistance: max. 3.0 ohms
-
Also check wires for short circuit to each other.
Specified value: infinity ohms
-
Erase DTC memory of Engine Control Module (ECM), Diagnostic mode 4: Reset/erase diagnostic data.
-
Generate readiness code.
If no malfunction is detected in the wiring and if the voltage supply was OK:
-
Replace accelerator pedal module with Throttle Position (TP) Sensor -G79- and Accelerator Pedal Position Sensor 2 -G185-.
-
Erase DTC memory of Engine Control Module (ECM), Diagnostic mode 4: Reset/erase diagnostic data.
-
Generate readiness code.
If no malfunctions are found in wires and there was no voltage:
-
Replace Engine Control Module (ECM) -J623-.