Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Position of subframe is now secured.
-
Carefully lower subframe with components.
‹› Make sure there is enough clearance for brake lines, electrical lines and driveshaft centering pin when lowering.
Subframe with Components, Installing
Installation is performed in the reverse order of removal. Observe the following when doing so:
-
When installing the wires for the electrical parking brake, make sure the dimension - a - between the connector - 1 - and the retainer - 2 - is exact.
Dimension - a - = 150 mm
Remove driveshaft at rear final drive.
-
Bleed brake system.
Tightening Specifications