Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Rear Knuckle: Service and Repair
Overview
All Wheel Drive (AWD)
Wheel Bearing Housing and Trailing Arm Assembly Overview
The - arrow - points in driving direction.
1
Cover
2
Mounting Bracket
3
Coupling Rod
‹› Connects stabilizer to trailing link/wheel bearing housing.
4
Bolt
‹› 90 Nm + 45° turn
‹› Observe tightening sequence. Refer to => [ Position: Threaded Connection
of Trailing Link/Wheel Bearing Housing ] See: Service and Repair/Removal and Replacement/Rear Suspension/All Wheel Drive (AWD).
‹› Always replace after removal.
5
Trailing Arm
‹› Different versions. Refer to => [ Trailing Arm Characteristics ] See: Trailing Arm/Application and ID.