Passat Sedan 4Motion V6-3.6L (BLV) (2007)
14
Stone Protection Plate
15
Bolt
‹› M6 x 12
‹› 8 Nm
16
Nut
‹› Self-locking
‹› Always replace after removal.
‹› Always tighten threaded connections in curb weight position. Refer to => [ Rear Axle in Curb Weight Position ]
17
Washer
18
Bolt
‹› M14 x 1.5 x 95
‹› 130 Nm + 90° turn
‹› Always replace after removal.
‹› Always tighten threaded connections in curb weight position. Refer to => [ Rear Axle in Curb Weight Position ].
19
Washer
20
Upper Control Arm
‹› Removing and installing, refer to => [ Upper Transverse Link ] See: Service and Repair/Removal and Replacement/Rear Suspension/All
Wheel Drive (AWD).
21
Washer
22
Nut
‹› Self-locking
‹› Always replace after removal.
23
Wheel Bearing Housing
‹› Removing and installing, refer to => [ Wheel Bearing Housing ] See: Service and Repair/Removal and Replacement/Rear Suspension/All
Wheel Drive (AWD).
24
Washer
25
Bolt
‹› M14 x 1.5 x 95
‹› 130 Nm + 90° turn
‹› Always replace after removal.
‹› Always tighten threaded connections in curb weight position. Refer to => [ Rear Axle in Curb Weight Position ].
26
Tie Rod
‹› Various versions, refer to => [ Tie Rod Characteristics ] See: Trailing Arm/Application and ID.
‹› Closed in direction of travel (the right and left tie rods are different).