Passat Sedan 4Motion V6-3.6L (BLV) (2007)
6
Washer, commercially available
7
Nut (T10263/5)
8
Spindle (T10263/4)
-
Pretension special tools.
-
Pull out bonded rubber bushing by operating pump.
Front or Rear Bonded Rubber Bushings, Installing
Installation is performed in the reverse order of removal. Observe the following when doing so:
Front and rear bonded rubber bushings have slightly different installation heights. When installing, observe allocation.
Bonded rubber bushing must be installed in the correct direction, note marking on subframe.
-
Insert special tools with bonded rubber bushing into subframe as illustrated.
CAUTION!
(T10263/3) must be positioned so that locking tabs on bonded rubber bushing align with opening on (T10263/3).
1
Nut (T10263/5)
2
Washer, commercially available
3
Press piece (T10263/3)
4
Subframe
5
Bonded rubber bearing
6
Press piece (T10263/2)
7
Hydraulic Press (VAS 6178) with Pressure Head (T10205/13)
8
Washer, commercially available
9
Nut (T10263/5)
10
Spindle (T10263/4)
-
Pretension special tool with bonded rubber bushing.
-
Carefully insert bonded rubber bushing by operating pump until collar lies on subframe without a gap.
-
Bleed brake system.