Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Trailing Arm: Service and Repair
Removal and Installation
Trailing Arm With Mounting Bracket
All Wheel Drive (AWD)
Trailing Arm with Mounting Bracket
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1332)
‹› Mount (T10149)
Removing
-
Remove wheel.
-
Remove coil spring. Refer to => [ Coil Spring ]. See: Service and Repair/Removal and Replacement/Rear Suspension/All Wheel Drive
(AWD)/Removal and Installation/Coil Spring
-
Remove retainer - 1 -, pressing out inner pins of rivets - arrows A -.
-
Remove the coupling rod - 2 - from trailing link.
-
Remove bolts - arrows B -.
-
Unclip electrical wire from mounting bracket.
-
Mark installation position of mounting bracket on body.
-
Remove bolts - arrows -.