Passat Sedan 4Motion V6-3.6L (BLV) (2007)
/Page-2780002.png)
-
Remove longitudinal control arm - 1 - with mounting bracket.
If longitudinal control arm is being replaced, mounting bracket must be removed from longitudinal control arm.
-
To do so, clamp longitudinal control arm into vise so that mounting bracket - 1 - makes contact at vise - arrow -.
-
Remove bolt - 2 -.
Installation position of mounting bracket to trailing link must then be adjusted.
Determining Installation Position of Mounting Bracket Relative to Trailing Link
Measure dimension - a - from center of bolt to outer edge of mounting bracket.
