Passat Sedan 4Motion V6-3.6L (BLV) (2007)
‹› 3 Nm
4
Pin
‹› Do not grease.
5
Securing Plate
‹› Always replace after removal
6
Nut
‹› 9 Nm
‹› Quantity: 4
7
Selector Housing
‹› With seal
8
Selector Lever Cable
‹› Do not grease the cable.
‹› Removing and installing, refer to => [ Selector Lever Cable ] See: Service and Repair/Removal and Replacement/09M,09MA
Transmission/Passat and CC Specific Components.
‹› Checking, refer to => [ Selector Lever Cable, Checking ] See: Shift Linkage/Shift Cable/Testing and Inspection.
‹› Adjusting, refer to => [ Selector Lever Cable, Adjusting ] See: Shift Linkage/Shift Cable/Adjustments.
9
Bolt with Washer
‹› 8 Nm
‹› Quantity: 4
Selector Handle With Cover
Selector Handle with Cover
For all handles there is the possibility to push the button into the handle. Do not install the handle with the button pushed in under any
circumstance.
-
Before removing, pull the button past it's pressure point - arrow -.