Passat Sedan 4Motion V6-3.6L (BLV) (2007)
-
Place the drip tray (VAS 6208) under the rear final drive.
-
Remove the oil fill plug - arrow -. (Shown with final drive removed for the sake of a better illustration).
-
Install adapter - A - to until seated.
-
Engage elbow - B - with adapter - A -.
-
Route hose over axle shaft.
‹› Hose must not hang through. It must enter above left rear wheel on vehicle.
-
Lower the vehicle.
-
Make sure valve - arrow - is closed.