Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Transmission Speed Sensor: Service and Repair
Transmission Output Speed Sensor
Transmission Output Speed Sensor
Removing
-
Remove the valve body. Refer to => [ Valve Body ] See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Valve Body.
-
Remove the bolt - 2 - for the transmission output speed (RPM) sensor (G195).
-
Remove the sensor from the transmission.
Installing
Installation is performed in the reverse order of removal. Pay attention to the following:
-
Press the sensor into the transmission until seated.
-
Install the bolt - 2 - for the transmission output speed (RPM) sensor. Tightening specification, refer to => [ Fastener Tightening Specifications ]
See: Automatic Transmission/Transaxle/Valve Body/Specifications/Fastener Tightening Specifications - Gears, Hydraulic Controls.
-
Install the valve body. Refer to => [ Valve Body ] See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Valve Body.