Passat Sedan 4Motion V6-3.6L (BLV) (2007)
/Page-2075008.png)
Tiguan, refer to => [ Bevel Box ] See: Service and Repair/Removal and Replacement/Bevel Box.
-
Set the bevel box in the hole - arrow - designated with the number - 5 - on the (T10108).
A Install the M12 x 10 nuts (Qty: 4) between the bevel box and (T10108). The nuts act as spacers.
-
Align the bevel box to the hole that is opposite it and secure.
-
Place the (VAS 6208) underneath.
-
Drain the oil from the bevel box.
-
Secure the bevel box output flange using (T10108/1) and M10 x 30 bolts - arrows -.
-
Remove the output flange nut.
A Socket attachment SW 36 for 3/4 inch drive
-
Pivot the bevel box so that the output shaft faces upward.
