Passat Sedan 4Motion V6-3.6L (BLV) (2007)
/Page-2075010.png)
-
Fill area between the sealing lip and dust lip of the new seal halfway with sealing grease (G 052 128 A1).
-
Pull in the output flange using (20/10) - A -.
A (20/10)
-
Position the pulling hooks on the underside of the drive pinion housing.
-
Lubricate the threads of the new nut with locking compound (D 000 600).
-
Tighten the new nut to specification, refer to - item 10 -=> [ Nut ] See: Bevel Box Assembly Overview.
