Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Windshield Washer Spray Nozzle: Service and Repair
Windshield Washer System Spray Nozzles
Windshield Washer System Spray Nozzles
Removing:
-
Push nozzle upward - arrow A - and pull out of flap at bottom - arrow B -.
-
Disconnect hose - 1 - from washer nozzle and disconnect harness connector - 2 - of heated washer nozzle.
Installing:
-
Connect harness connector and hose to washer nozzle.
-
Slide spray nozzle into installation opening until it engages audibly.
-
Adjust spray jets, refer to => [ Windshield Washer System Spray Nozzles, Adjusting ] See: Adjustments/Windshield Washer System Spray
Nozzles, Adjusting.