Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Wiper Arm: Adjustments
Rear Window Wiper Blade Park Position, Adjusting
Rear Window Wiper Blade Park Position, Adjusting
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331/)
Distance - x - between wiper rubber blade tips - 1 - and lower edge of window - 2 - must be 23 mm.
-
If necessary, set end position of rear window wiper by offsetting wiper arm.
Remove wiper arm, refer to => [ Rear Window Wiper Arm ] See: Service and Repair/Removal and Replacement/Rear Window Wiper Arm.
-
Tighten all threaded connections to the specification shown in => [ Fastener Tightening Specifications, Rear Window Wiper and Washer System ]
See: Specifications/Fastener Tightening Specifications, Rear Window Wiper and Washer System.