Passat Sedan 4Motion W8-4.0L (BDP) (2002)
^
Insert brake pads.
^
Secure brake caliper housing with new self-locking bolts
Note: Repair kit includes four self-locking hex bolts which must always be installed.
This sequence is only valid for vehicles with Front Wheel Drive
^
Attach parking brake cable to brake caliper housing.
^
Adjusting parking brake, Refer to Parking Brake, System, Adjustments.
Operate foot brake first after adjusting parking brake.
Continued for all vehicles
^
Install wheels.
Note:
^
After each brake pad change with vehicle stationary, firmly depress brake pedal several times so that the brake pads are properly seated in their
normal operating position.
^
Check brake fluid level after changing brake pads.