Passat Sedan 4Motion W8-4.0L (BDP) (2002)
Mounting bracket with clip for mounting brake light switch.
1 - Mounting bracket for pedal assembly
2 - Clip
3 - Brake light switch -F- with brake pedal switch -F47-
Note: In order to assure sufficiently secure fitting, brake light switch must not be installed more than once.
4 - Clutch vacuum vent valve switch -F36-
Mounting procedure resembles procedure for brake light switch -F-
Installing brake light switch
^
Clip integrated in mounting bracket
^
Brake pedal not depressed
-
Guide the switch -3- into the mounted clip -2-.
-
Then press it in far enough that the plunger is resting at brake pedal.
Checking adjustment after installation
^
1 - Brake pedal
^
2 - Mounting bracket
^
3 - Brake light switch -F- with brake pedal switch -F47-
Adjustment dimension a = maximum 0.7 mm