Passat Sedan 4Motion W8-4.0L (BDP) (2002)
Engine Mount Control Solenoid: Testing and Inspection
Electro-Hydraulic Engine Mount Solenoid Valve, checking
Recommended special tools and equipment
-
VAG1526 multimeter or VAG1715 multimeter
-
VAG1594 connector test kit
-
Wiring diagram
Test requirements
-
The respective fuses of Left Electro-Hydraulic Engine Mount Solenoid Valve -N144- must be OK.
-
Fuses -1, 2, 3, 4 and 7- in protective housing (plenum chamber, left) must be OK.
-
Ignition switched off.
Test sequence
-
Disconnect 2-pin connector from Left Electro-Hydraulic Engine Mount Solenoid Valve -N144- (arrow).
Checking resistance