Passat Sedan 4Motion W8-4.0L (BDP) (2002)
^
Ensure that all roller rocker fingers seat properly on valve stem ends -1- and are clipped onto respective support elements -2-.
Cylinder bank 1
^
Before installing coat facing contact surfaces of bearing caps 7 and 8 lightly with grease G 052 723 A2.
^
Oil running surfaces of both camshafts.
^
Place respective camshaft carefully in camshaft bearings of cylinder head, observing camshaft identification.
Note: Observe installation position of bearing caps:
^
Points of bearing caps -A- of intake and exhaust camshafts face outward.
^
Identification on bearing caps is legible when read from the intake side.