Passat Sedan 4Motion W8-4.0L (BDP) (2002)
/Page-479006.png)
A - Intake camshaft
^
Tighten bearing caps 3 and 7 alternately and diagonally to 5 Nm and 1/8 turn (45°) further.
^
Install bearing cap 5 and tighten to 5 Nm and 1/4 turn (45°) further.
^
Install bearing caps 1 and 9 and tighten to 5 Nm and 1/4 turn (45°) further.
B - Exhaust camshaft
^
Tighten bearing caps 4 and 8 alternately and diagonally to 5 Nm and 1/4 turn (45°) further.
^
Install bearing cap 6 and tighten to 5 Nm and 1/4 turn (45°) further.
^
Install bearing caps 2 and 10 and tighten to 5 Nm and 1/4 turn (45°) further.
Cylinder bank 2
^
Before installing coat facing contact surfaces of bearings 27 and 28 with grease G 052 723 A2.
^
Oil running surfaces of both camshafts.
^
Place respective camshaft carefully in camshaft bearings of cylinder head, observing camshaft identification, Refer to Intake/Exhaust Valve,
Service and Repair, Valve Gear Servicing, See Fig 7.
