Passat Sedan 4Motion W8-4.0L (BDP) (2002)
/Page-516005.png)
^
Lower subframe slowly with workshop crane.
^
Remove workshop crane, swing stabilizer bar down.
^
Remove retainers for coolant and refrigerant lines on upper sump.
^
Remove oil pump oil lines.
^
Remove crankcase breather oil return line
^
Remove power steering pump from bracket and remove bracket.
^
Remove oil return lines.
^
Remove upper sump.
Installing
^
Clean sealing surface. Surface must be free of oil and grease.
Installing upper sump
^
Install upper sump with a new gasket.
