Passat Sedan 4Motion W8-4.0L (BDP) (2002)
^
Before installing, remove oil remains from crankshaft journal with a clean cloth.
^
Install assembly sleeves T10122/1 and T10122/2 together. Slide oil seal -A- until stop onto assembly sleeve T10122/2.
Note: Do not remove support ring out of seal until immediately before installation.
^
Separate both assembly sleeves.
^
Install assembly sleeve T101 22/2 together with oil seal on crankshaft flange.
^
Press in oil seal using assembly sleeve T10122/3 until stop.
The rest of the assembly is basically a reverse of the disassembling sequence.