Passat Sedan 4Motion W8-4.0L (BDP) (2002)
/Page-561001.png)
Water Pump: Service and Repair
Coolant pump, removing and installing
Special tools and equipment
^
VAG 1331 Torque wrench (5...50 Nm)
^
Drip tray VAG 1306
Removing
^
Remove ribbed belt.
^
Drain coolant.
^
Unscrew coolant pump securing bolts and remove coolant pump.
Installing
Installation is performed in the reverse sequence. When installing note the following:
^
Moisten new O-ring with coolant.
^
Install coolant pump.
^
Tighten securing bolts.
Tightening torque: 20 Nm
^
Install ribbed belt.
^
Fill system with coolant.
