Passat Sedan 4Motion W8-4.0L (BDP) (2002)
9
Heated Oxygen Sensor (HO2S) 2 -G108-*, 50 Nm
-
for cylinder bank 2
-
Only use "G 052 112 A3" to grease thread; do not let "G 052 112 A3" get onto slit of oxygen sensor
-
Check oxygen sensor heater for oxygen sensors before catalytic converter.
-
Check oxygen sensors and oxygen sensor regulation before catalytic converter.
-
Can only be replaced with the engine removed.
10
Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) -G131- bank 2*, 50 Nm
-
for cylinder bank 2
-
Only use "G 052 112 A3" to grease thread; do not let "G 052 112 A3" get onto slit of oxygen sensor
-
Check oxygen sensor heater for Oxygen Sensors (O2S) behind Three Way Catalytic Converter (TWC).
-
Check Oxygen Sensors (O2S) and oxygen sensor control behind Three Way Catalytic Converter (TWC).
-
Can only be replaced with the engine removed.
11
Suspended mount
-
Individual components Fig. 2 and Fig. 4
12
Left front exhaust pipe
13
Exhaust manifold with left catalytic converter module
-
Check left catalytic converter module.
-
Can only be replaced with the engine removed.
14
Upper heat shield
15
10 Nm
16
Seal.
Fig. 1 Individual right mounting components for vehicles with automatic transmission
1
Strap with buffer
2
Exhaust pipe
3
Washer
4
Hex bolt, 25 Nm
5
Self-locking nut, 25 Nm
6
Spacer sleeve
7
Compression spring
8
Hex bolt
Fig. 2 Individual left mounting components for vehicles with automatic transmission
1
Strap
2
Buffer
3
Bracket at transmission
4
Spacer sleeve