Passat Sedan 4Motion W8-4.0L (BDP) (2002)
Special Tools:
-
Diagnostic Tool VAS 5051B or VAS 5052 Vehicle Diagnosis, Testing and Information Tool
-
Diagonal Cutter (e.g. Snap-On # 388BCP) or equivalent
-
VAG 1331 Torque wrench or (equivalent 5 - 50 Nm)
-
3409 Trim Removal Wedge tool, or equivalent
-
Shop vacuum or air vacuum (e.g. Blue Point AV1000 or equivalent)
Vehicle Preparation
-
Record radio presets
-
Cycle windshield wipers to ensure they are in the "rest" position
-
Turn all electrical consumers off
-
Ensure ignition switch is "OFF" and remove ignition key
-
Open hood
Section A - Remove Chamber Cover
-
Remove rubber seal from plenum chamber cover -1-
-
Lift and pull plenum chamber cover -2- towards front of vehicle and remove
-
Disconnect ground cable (GND) from the negative (-) battery terminal
-
Disconnect positive cable (POS) from the positive (+) battery terminal
Section B - Remove Wiper Arm