Passat Sedan 4Motion W8-4.0L (BDP) (2002)
/Page-872004.png)
-
Also check wires for short circuit to each other, to vehicle Ground (GND) and to B+.
Specified value: infinity Ohms
-
Erase DTC memory of Engine Control Module (ECM), Diagnostic mode 4: Reset/erase diagnostic data.
-
Generate readiness code. See: Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes
If no malfunctions are found in wires:
-
Check voltage supply of Engine Control Module (ECM) according to wiring diagram:
-
Erase DTC memory of Engine Control Module (ECM), Diagnostic mode 4: Reset/erase diagnostic data.
-
Generate readiness code. See: Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes
