Passat Sedan 4Motion W8-4.0L (BDP) (2002)
-
Knock Sensor (KS) 2 -G66-, brown Fig. 2
-
Knock sensor 3 -G198-, orange Fig. 3
-
Knock sensor 4 -G199-, gray Fig. 4
7
3-pin harness connector
-
Terminals are gold-plated Black for Knock Sensor (KS) 1 -G61-
-
Brown for Knock Sensor (KS) 2 -G66-
-
orange for Knock sensor 3 -G198-
-
gray for Knock sensor 4 -G199-
8
Spark plug, 30 Nm
-
Type and spark plug gap, test data, spark plugs
9
Ignition Coil 1 with Power Output Stage -N70-, Ignition Coil 2 with Power Output Stage -N127-, Ignition Coil 3 with Power Output Stage -N291-,
Ignition Coil 4 with Power Output Stage -N292-, Ignition Coil 5 with Power Output Stage -N323- to Ignition Coil 8 with Power Output Stage
-N326-)*
Fig. 1 Control housing, disassembling and assembling
-
Removing and installing control housing.
-
Check valves for camshaft adjustment.
Cylinder bank 1
1
Valve -1- for camshaft adjustment -N205-
2
Camshaft Adjustment Valve 1 (exhaust) -N318-
3
Glide track: clipped in at control housing
4
Control housing
5
8 Nm
Cylinder bank 2
1
Camshaft Adjustment Valve 2 (exhaust) -N319-
2
Valve -2- for camshaft adjustment -N208-
3
Glide track: clipped in at control housing
4
Control housing
5
8 Nm
Fig. 2 Knock sensors 1 and 2 cylinder bank 1
1
Knock Sensor (KS) 1 -G61-:
for cylinder 1 and 2
2
Knock Sensor (KS) 2 -G66-, brown: