Passat Sedan 4Motion W8-4.0L (BDP) (2002)
Rapid data transfer
HELP
Select function XX
-
Press buttons 0 and 2 to select function 02, "Check Diagnostic Trouble Code (DTC) memory".
Indicated on display
Rapid data transfer
Q
02 - Check DTC memory
-
Press -Q- button to confirm input.
The number of stored malfunctions appears in the display.
X DTC recognized!
->
The number of stored DTCs or "No DTCs recognized" appears in the display and are printed out one after another.
-
When last DTC has been displayed and printed out, correct malfunctions as described in DTC table. See: Powertrain Management/Computers and
Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/VAG Code Charts/Multi-Function Steering
Wheel/About Trouble Codes
If "No DTC recognized" is displayed, the program will return to the initial position after pressing -> button.
No DTC recognized!
->
Indicated on display (select function):
Rapid data transfer
HELP
Select function XX
If display not indicated as shown: See Scan tool operating instructions
-
End output (function 06).
-
Switch off ignition and disconnect Data Link Connector (DLC).
NOTE:
If DTCs were recognized, follow the sequence below:
-
1. Correct malfunction.
-
2. Erase Diagnostic Trouble Code (DTC) memory (function 05).
-
3. Check Diagnostic Trouble Code (DTC) memory (function 02).