Passat Sedan 4Motion W8-4.0L (BDP) (2002)
/Page-1658002.png)
^
Pulling off inner race see Fig. 3
^
Pressing in see Fig. 5
9. Eccentric bolt
10. Eccentric washer
11. Self-locking nut, 95 Nm
^
Replace each time after removing
12. Hex bolt, 50 Nm
13. Coupling rod
^ Installation position: Bend faces outward
14. Hex bolt M12 x 1.5 x 95
^
70 Nm + turn 90° further
^
Replace each time after removing
15. Lower control arm
16. Front bonded rubber mounting for lower control arm
^
Pressing out is extremely difficult or in some cases impossible!
^
If bonded rubber mounting is faulty replace complete control arm.
17. Rear bonded rubber mounting for lower control arm
^
Removing and installing
18. Drive shaft
^
Removing and installing
^
Servicing
19. Front bonded rubber mounting for upper control arm
^
Removing and installing
20. Multipoint socket head bolt
21. Plate
22. Upper control arm
23. Washer
24. Self-locking nut
^
Replace each time after removing
25. Rear - bonded rubber mounting for upper control arm
^
Pressing out and in
26. Hex socket head bolt
