Passat Sedan 4Motion W8-4.0L (BDP) (2002)
Transmission Position Switch/Sensor: Service and Repair
Multi-Function Transmission Range (TR) Switch-F125-, replacing
Removing
-
Remove left wheel.
-
Remove left-hand transmission bracket.
-
Unscrew bolts and detach multi-function TR switch -F125- from transmission; pull switch off selector shaft.
Installing
Place multi-function TR switch -F125 centered on selector shaft. Do not cant or use force when installing. Danger of damaging switch contacts.
-
Fit multi-function TR switch -F125- on selector shaft: flat section in splines in switch -3- must coincide with flat section on selector shaft -1-.
-
Turn switch so that hole -4- on switch housing can be fitted on locating pin -2- on transmission housing.
-
Bolt multi-function TR switch -F125- to transmission and tighten.
-
Install left-hand transmission bracket.
-
Remove left wheel.