Passat Sedan 4Motion W8-4.0L (BDP) (2002)
-
Apply extractor lever VW 681 directly behind the sealing lip of the oil seal to avoid damaging the bearing ring behind it.
Installing
-
Insert bearing ring.
-
Apply ATF to circumference and sealing lips of oil seal.
Installation position:
Open side of oil seal faces transmission.
-
Using thrust piece 3295, drive in torque converter oil seal until stop of thrust piece.
-
Install transmission.
Torque converter draining
Special tools and equipment
-
VAG 1358 A Oil extractor
-
VAG 1358 A/1 Oil extractor probe
If the torque converter has become fouled by abrasion or when performing a major overhaul of the transmission, drain the torque converter as follows: