Passat Sedan 4Motion W8-4.0L (BDP) (2002)
Valve Body: Service and Repair
Transmissions With Hydraulic Control Type E18/2
Assembly Overview
Valve body for transmissions with hydraulic control Type E18/2, assembly overview
WARNING!: Do not run engine or tow vehicle with oil pan removed or when there is no ATF in transmission.
-
The valve body can be removed with the transmission installed.
-
Apply only ATF to O-rings when fitting. Other lubricants lead to malfunctioning of the transmission hydraulics.
-
Always replace soiled or defective valve body.
-
Use only lint-free cloths.
-
Check and top up ATF when oil pan has been refitted.
1. Drain plug, 40 Nm
-
With seal
-
Always replace
-
Remove plug to drain ATF
2. Bolt, 10 Nm
-
Tighten oil pan bolts in several stages and in diagonal sequence
3. Oil pan
4. Gasket