Passat Sedan 4Motion W8-4.0L (BDP) (2002)
/Page-1296011.png)
-
Insert drive shaft onto transmission shaft and into wheel bearing housing.
-
Insert upper links into wheel bearing housing, insert new bolt and tighten new nut.
-
When tightening press upper links downward as far as possible!
-
Bolt drive shaft to transmission.
-
Tighten multi-point socket head bolts to prescribed tightening torque using diagonal sequence.
-
Install inner joint to drive shaft and initially tighten bolts diagonally to 10 Nm.
Multi-point socket head bolt M 8 x 48 - 40 Nm
Multi-point socket head bolt M 10 x 20 - 77 Nm
Multi-point socket head bolt M 10 x 48 - 77 Nm
-
Push ABS vehicle speed sensor into wheel bearing housing onto stop and insert cable in retainer on brake caliper.
-
Install wheel and tighten.
-
Tighten drive shaft hex bolt only with vehicle standing on its wheels -danger of accident-.
