Passat Sedan 4Motion W8-4.0L (BDP) (2002)
-
Remove cover plate over the right-hand drive shaft (arrows 1 and 2).
-
If fitted, remove cover above left-hand drive shaft.
-
Place drip tray underneath.
-
Disconnect drive shaft from flanged shaft.
-
Tie-up drive shaft as high as possible. Do not damage paint on drive shaft.
When replacing left-hand oil seal:
-
Remove flange shaft, to do this screw puller T10037 onto differential cover (arrow).
When replacing right-hand oil seal:
-
Remove flange shaft, to do this secure puller T10037 to transmission housing (arrow).