Passat Syncro Sedan V6-2771cc 2.8L DOHC (AHA) (1999)
/Page-2242002.png)
-
Remove bolts - arrows -.
-
Unclip door trim - 1 - at the sides using Pliers 3392.
-
Lift door trim upward out of window recess.
-
Pull cable - 1 - out of guide - 2 - in direction of arrow and disengage.
-
Disconnect harness connectors - 3 - and - 4 -.
Installing
-
Pull off window recess seal - 1 - from door trim and insert in window recess.
NOTE: Replace clips before installing door trim.
Passengers Side Front Door Trim, Removing And Installing
