Passat Syncro Sedan V6-2771cc 2.8L DOHC (AHA) (1999)
CAUTION:
^
At least two bolts must always remain tightened so that the position of the subframe does not change
^
Bolts -5-, -6-, -7- and -8- must be replaced!
-
Install bolts -7- and -8-.
Tightening torque: 110 Nm (81 ft. lbs.) + 90°.
-
Remove special tool VAG 1941.
-
Install bolts -5- and -6-.
Tighten to 110 Nm (81 ft. lbs.) + 90°
-
Tighten bolts -1-, -2-, -3- and -4- to 60 Nm (44 ft. lbs.).
CAUTION: The toe setting must be checked after each camber adjustment.