Passat Syncro Sedan V6-2771cc 2.8L DOHC (AHA) (1999)
/Page-1915002.png)
Fig. 4 Pulling front bushing out
Fig. 5 Pulling front bushing in
-
Insert bushing -A- in 8 mm recess in thrust piece 3346/1.
-
Pull bushing in onto stop.
Locating Control Arm Bushing, Replacing
Locating control arm bushing, replacing
Special tools required
CAUTION: Always use protective jaw covers when clamping aluminum control arms in a vise.
Pulling bushing out of control arm
