Passat Syncro Sedan V6-2771cc 2.8L DOHC (AHA) (1999)
Stabilizer Link: Service and Repair
Connecting link for stabilizer bar, removing and installing
Removing
-
Remove wheel.
-
Remove mounting bolts -1- for brake caliper housing.
-
Remove connecting link from stabilizer bar.
1. Connecting link
-
Remove clamp -3- for stabilizer bar -2-.
1. Axle beam
4. Eccentric bolt
-
Remove bolt -3- for shock absorber to lower control arm.
1. Control arm
2. Parking brake cable
3. Bolt for shock absorber
A. Retaining clip for parking brake cable
-
Pull wheel bearing housing and lower control arm downward.