Passat Syncro Sedan V6-2771cc 2.8L DOHC (AHA) (1999)
Installing upper spring retainer
-
Set angle scale (arrow) of tensioning device 1752/2 to 0°.
-
Install upper spring retainer, washer and suspension strut mounting.
-
Using adjustment gauge 1752/8, position upper spring retainer to 11ø.
The 11° position on the adjustment gauge 1752/8 is recognized with:
"vorn links (front left)"
or
"vorn rechts (front right)"
Note:
The 11° position of the spring retainer is a mirror image on the left and right-hand sides.
Upper spring retainer installation position.
Upper spring retainer installation position
Studs on upper spring retainer are offset 11° to shock absorber bolt axis -1-.
F=Direction of travel
R=Spring retainer, right-hand side
L=Spring retainer, left-hand side
A=11° + 2°
Coil spring installed position