Passat Syncro Sedan V6-2771cc 2.8L DOHC (AHA) (1999)
/Page-1510002.png)
-
Drive in new seal until press tool contacts stop. Make sure seal remains straight.
-
Install multi-function Transmission Range (TR) switch -F125-.
-
Push transmission selector lever onto selector shaft and drive in roll pin.
Tightening torques
Transmission support to transmission 40 Nm (30 ft. lbs.)
Transmission support to bonded rubber mount 40 Nm (30 ft. lbs.)
Bonded rubber mount to subframe 23 Nm (17 ft. lbs.)
Multi-function Transmission Range (TR) switch -F125- to transmission 8 Nm (71 inch lbs.)
