Passat Syncro Sedan V6-2771cc 2.8L DOHC (AHA) (1999)
Axle Shaft: Service and Repair
Rear Suspension
Service Notes
Drive axle with constant velocity joint, assembly
Grease quantity and type
Constant velocity joints are packed with grease Part NO. G 000 603:
Regrease the joint, if necessary, when replacing the protective boot.
1. Outer constant velocity joint
^
Only replace complete
^
Removing refer to Fig. 1
^
Installing: drive onto shaft to stop with plastic-headed hammer
2. Bolt
^
Always replace each time after removing
^
120 Nm (89 ft. lbs.) and turn 180° further
WARNING: The drive axle bolt must be loosened or tightened only with the vehicle standing on its wheels.
3. Protective boot
^
Check for tears and chafing